Biohort SmartBase PLUS Equipment Locker, 90

The SmartBasePLUS is the ideal solution if you are going to install your Biohort equipment locker on a lawn or slope. In contrast to the SmartBase, the SmartBase PLUS comes with ground screws instead of adjustable feet and can thus compensate for slopes up to 10 cm. This ensures that your equipment locker remains stable on uneven ground. It is crucial however, to compact the soil and remove larger rocks first.

• Suitable for use with the Biohort equipment locker
• Equipped with ground screws instead of adjustable feet
• Compensates for slopes of up to 10 cm
• Little excavation required
• Gravel layer for frost protection not required
• Easy to remove if necessary
• Stormproof
• Load capacity: max. 200 kg/m2

Contents:

• Specially designed foundation frame
• Aluminium floorboards with a grooved surface
• Ground screws hot-dip galvanized
• Mounting plates can be adjusted several times
• Integrated water barrier to protect against water ingress
• Hand screwing tool

An aluminium base plate and aluminium base frame are no longer required!

Assembly:

• Assembly time: 2 to 4 hours (two people)
• Required tools (not included): impact drill, drill Ø 40 x 600 mm, spirit level, drill, open-end wrench SW13 and SW24, shovel

Method:

1. Prepare the building site
2. Pre-drill holes with a hammer drill and screw in the ground screws (enclosed)
3. Connect the mounting plate to the ground screws and align them with a spirit level
4. Position and fix the frame and connecting struts
5. Insert the aluminium planks and fasten them

Note: These tips are non-binding suggestions. The customer is responsible for an appropriate foundation design. Biohort accepts no liability for damage caused by inadequately fastened components.