Blumat Blumat for Indoor Plants - Classic

Whether you use this convenient tool all year round or simply when you're on holiday, the watering cone makes supplying your plants with the right amount of water easy. All you need is a container with water that you place next to your houseplant. This serves as a water reservoir for the Blumat.

• Watering cone with a drip hose
• A water container (not included)
• Easy to attach - no repotting required
• Quantity needed: for larger pots, use 2 watering cones, for boxes, use 1 cone every 15 to 20 cm

How it works:

1. Pull the green cap off the watering cone
2. Soak the cone in water for a few minutes
3. Fill the cone to the brim with water
4. Push the green cap firmly back on
5. Push the cone with the permeable clay tip tip-down into the soil
6. Submerge the suction hose in a full container of water; make sure the hose reaches the bottom of the container
7. The water level in the water vessel should always be below the green Blumat cap
8. Low water needs: the planter should be higher than water container
9. Medium water needs: the planter should be on the same level as water vessel
10. High water needs: the planter should be lower than water vessel